| Special Vehicle: | Comprising of welded, warp-resistant bulk frame constuction made of high-tensile fine-grained steel; 4 individual telescopic outrigger beams. |
| Drive Mechanism: | Hydrostatic drive, diesel engine on superstructure. One hydraulic motor per wheel, driven by a hydraulic double pump located on the superstrucutre. |
| Transmission: | Each hydraulic motor has a 2-stage planetary gear. Different transmission ratio of speeds are selected for various driving programs. |
| Wheel Axis: | Drive 6x6x6 1st Wheel Axis: Steering Drive 2nd Wheel Axis: Steering Drive(Steering Engagable) 3rd Wheel Axis: STeering Drive(Steering Engagbale) |
| Single Wheel Suspension: | Hydropneumatic suspension, hydraulically lockable. Suspension Travel: +5 In. -4.5 In., automatic level adjustment. |
| Steering: | Dual cicuit steeering system with auxiliary steering cylinder for steering wheel axis. Electrically driven emergency steering pump; automatically engages in the event of main pump failure. For dring the crane off the raod, wheel axis 1 is steered. For driving the crane in limited area, wheel axis 2 and 3 can be steered too in the same or opposite direction by means of a controlled steering unit. |
| Driving Performance: | Speed:....................................47 MPH Climbing Ability......................70% Turning Radius:.......................27 Ft. - 11 In. With all-Wheel steering:..........19 Ft. - 8 In. |
| Permanent Brake: | Hydraulic retarder(several power stages) |
| ASC Function: | The automatic slip control prevents partial or full spinning of each individual tire |
| Tires: | 16.00 R25 Single Tires |
| Brakes: | Service Brake: Pneumatic dual-circuit brake system(effective on all wheels). 1st axis with duplex brake, 2nd and 3rd wheel axis with simplex brake. Single-chamber air drier with integrated pressure regulator. Parking Brake: Air-operated spring brake(effective on 2nd and 3rd wheel axis). |
| Hydraulic Outriggers: | Fully hydraulic 4-point telescopic outrigger system;can be controlled individually, horizontally and vertically from both sides of the crane chassis and from the driver's cab. Outrigger Span: Outrigger Length:...............23 Ft. - 10 In. Full Outrigger Width:.........24 Ft. - 2 In. Half Outrigger Width:........13 Ft. - 1 In. Retracted:............................7 Ft. - 6 In. Monitored by all levels. |
| Vehicle Electrical System: | Illumination and signal equipment: 24V halogen spot lights, back lights, rear fog light. |
| Tools: | 1 tool set, chocks |
2. Superstructure
Drive:
Make: Man
Type: D 2865 LF
Combustion Type: Diesel
Charge Cooling, Cooler: Water
No. of Cylinders: 5
Output: 335 HP at 2000 rpm
Torque: 2,033 LB-FT. at 1000-1500 rpm
Exhaust Standard: EURO 2
Fuel Tank: 105 Gal.
Hydraulic Systems:
Seperate main pumps comprising:
---1 driving pump: double axial piston variable displacement pump in closed cicuit.
---1 operational pump: double axial piston variable displacement pump in open cicuit with flanged gear pumps.
TANK
Volume: 211 Gal.
Oil cooler designed for retarder operation.
Monitoring of the hydraulic system by means of pressure gauges and level transducers.
Turntable:
Warp-resistant weldment and construction made of high-tensile fine-grained steel.
Dimensions:
Turning centre to back of superstructure: 11 Ft. - 10 In.
Swing radius: 12 Ft. - 4 In.
Hoisting Gear:
Axial piston constant-output motor;
Hoist drum with special grooves, integrated planetary gear and spring-loaded retaining brake.
Rope Diameter: .669 In.(17mm)
Max. Pull: 10,825 Lbs.
Rope Length: 590 Ft.
Max. Rope Speed: 377 FPM
RopeDrum Diameter: 14-3/4 In.
Derricking Gear:
1 differential cylinder with saftey return valve.
Boom adjustment angle:-7.0oto 82o
Boom adjustment time: 50 sec.
Slewing Gear
Planetary gear driven by a vane-type motor.
Spring-loaded retaining brake/service brake(foot operated).
Slewing speed 0 - 2.0 rpm(continuously variable).
Driver's Cab
1 man full-visibility cab, aluminium design.
Mounted on the left-hand side of the superstructure, all around saftey glass.
Front window from laminated glass with windscreen wiper and electrical washer assembly.
Roof window(shade-lite, bullet-proof glass) with windscreen wipers inner covering for roof window with integrated sun-blind.
Swing-slide door with dual sliding window.
Engine-powered hot water heater and engine-independent hot water heater with three-stage fan. The engine-independent hot water heater can also be used to warm up the engine.
Defroster and ventilation system, pneumatically sprung seat, neck support and heated rear mirror.
Adjustable controls for the crane operation and armrests.
Radio with cassette player, working spot lights.
Hydraulic bedding of driver's cab.
Operating Controls:
Automatic and manual level adjustment, suspension locking, automatic counterweight pick-up, automatic steering column release.
Monitoring Equipment:
Tachograph,odometer, hourmeter, fuel display.
Oil pressure indicator for engine, air pressure monitor for brake cicuits I and II.
Temperature display for engine, hydraulic oil and retarder.
Indicator Lamps for:
Steering pumps, generator, direction indicator, main beam,service brake,parking brake, collective fault signalfor drive system, suspension locking, low pressure monitor for air filter, hazard warning lights, rear fog light.
Crane Electrical System:
24V
Saftey Equipment:
Hoist limit switch, lower limit switch, pipe rupture saftey valves.
S.L.I.:
Electronic safe load indicator with automatic shutdown and digital displays for actual and permitted load, working radius and operating modes.
3. Telescopic Boom
Profile:
CT profile with slanted sheaf head made of high-tesile fine-grained steel comprisiong:
Basic boom section and seven hydraulic telescopic sections.
Max. boom length: (Extended) 132 Ft. - 10 In.
Min. boom length:(Retracted) 23 Ft. - 4 In.
The max. telescopic hoist load is limited by hydraulic pressure, hoist rope reving, boom angle and boom lubrication.
Telescopic System:
2 telescopic cylinders
(1 x 2-stage plunger cylinder and 1 x 5-stage plunger cylinder).
Retracting by menas of traction with telescopic winch.
Boom Head:
1 head sheave for hoist 1, option: 1 head sheave for hoist 2
6 deflection sheaves
Max. lifting capacity: 80 Ton (with heavy load device)
Lifting capacities above 55 Ton can be reached with heavy load device
4. Counterweight
Profile:
Several sections for wheel load trimming>
Total weight: Approx. 6.6 Tons.
Cylinder for automatic picking-up of counterweight on the superstructure.
Automatic picking-up of the counterweight can be done from the cab.
Counterweight Versions:
Additional counterweight: 3.3 Tons
5. Additional Equipment
5.1
Air conditioning system
5.2
Auxiliary heater (gas)
5.3
Tropicalized cooler execution
5.4
Special painting
5.5
Inscription according to customer's wishes
5.6
Spare Wheel: 16.00 R25 (with holding device)
5.7
Second winch for hoist 2
5.8
Trailer coupling (according to approval regulations)
5.9
Hook Block: 15 Tons
5.10
Hook Block: 35 Tons
5.11
Hook Block: 60 Tons
5.12
Swingaway Jib (manual)
5.13
Working Platform
5.14
Attachment Adapter
5.15
Winch Rotation Indicator
6. Crane Comparison
Description
CT.3
KMG 4085
Capacity
80 Tons
85 Tons
Main Boom
-Retracted
-Extended
23.3 Ft.
133 Ft.
38 Ft.
125 Ft.
Jib Optional
-Retracted
-Extended
-Offsetable
-Luffing
28.8 Ft.
42 Ft.
Variable 0-45o
Yes
33 Ft.
52 Ft.
0o-16o-30o
No
Max. Reach, Radius
-Main Boom
-Jib Retracted
-Jib Extended
118 Ft.
146.8 Ft.
160 Ft.
110 Ft.
140 Ft.
150 Ft.
Max. Hook Height
-Main Boom
-Jib Retracted
-Jib Extended
136 Ft.
164.8 Ft.
178 Ft.
128 Ft.
160 Ft.
180 Ft.
Elevation
-7o to 82o
-3o to 84o
Dimesions
-Length
-Width
-Height
29 Ft.
8 Ft.-2 In.
12 Ft.- 2 In.
44 Ft.- 2 In.
9 Ft.- 5 In.
12 Ft.- 5 In.
Tries
16.00 R25
14.00 R25/16.00 R25
Chassis
6x6x6
8x6x8
Oustide Turning Radius
19 Ft.- 8 In.
38 Ft.- 10 In.
GVW
80,000 Lbs.
106,000 Lbs.
Travel Speed
47 MPH
46 MPH
Gradeability
70%
60%
Slewing
2 RPM
2.4 RPM
Outrigger Span
-Full Width
-Half Width
-Retracted Width
24 Ft.- 1 In.
13 Ft.- O In.
7 Ft.- 6 In.
23 Ft.- 7 In.15 Ft.-8 In.
Engine
Man
Daimler Benz
Model
D2865LF
OM442
Electrical
24V
24V
Back to CT.3 main page.
E-mail us with any questions or comments!
| Drive: | Make: Man Type: D 2865 LF Combustion Type: Diesel Charge Cooling, Cooler: Water No. of Cylinders: 5 Output: 335 HP at 2000 rpm Torque: 2,033 LB-FT. at 1000-1500 rpm Exhaust Standard: EURO 2 Fuel Tank: 105 Gal. |
| Hydraulic Systems: | Seperate main pumps comprising: ---1 driving pump: double axial piston variable displacement pump in closed cicuit. ---1 operational pump: double axial piston variable displacement pump in open cicuit with flanged gear pumps. TANK Volume: 211 Gal. Oil cooler designed for retarder operation. Monitoring of the hydraulic system by means of pressure gauges and level transducers. |
| Turntable: | Warp-resistant weldment and construction made of high-tensile fine-grained steel. Dimensions: Turning centre to back of superstructure: 11 Ft. - 10 In. Swing radius: 12 Ft. - 4 In. |
| Hoisting Gear: | Axial piston constant-output motor; Hoist drum with special grooves, integrated planetary gear and spring-loaded retaining brake. Rope Diameter: .669 In.(17mm) Max. Pull: 10,825 Lbs. Rope Length: 590 Ft. Max. Rope Speed: 377 FPM RopeDrum Diameter: 14-3/4 In. |
| Derricking Gear: | 1 differential cylinder with saftey return valve. Boom adjustment angle:-7.0oto 82o Boom adjustment time: 50 sec. |
| Slewing Gear | Planetary gear driven by a vane-type motor. Spring-loaded retaining brake/service brake(foot operated). Slewing speed 0 - 2.0 rpm(continuously variable). |
| Driver's Cab | 1 man full-visibility cab, aluminium design. Mounted on the left-hand side of the superstructure, all around saftey glass. Front window from laminated glass with windscreen wiper and electrical washer assembly. Roof window(shade-lite, bullet-proof glass) with windscreen wipers inner covering for roof window with integrated sun-blind. Swing-slide door with dual sliding window. Engine-powered hot water heater and engine-independent hot water heater with three-stage fan. The engine-independent hot water heater can also be used to warm up the engine. Defroster and ventilation system, pneumatically sprung seat, neck support and heated rear mirror. Adjustable controls for the crane operation and armrests. Radio with cassette player, working spot lights. Hydraulic bedding of driver's cab. Operating Controls: Automatic and manual level adjustment, suspension locking, automatic counterweight pick-up, automatic steering column release. Monitoring Equipment: Tachograph,odometer, hourmeter, fuel display. Oil pressure indicator for engine, air pressure monitor for brake cicuits I and II. Temperature display for engine, hydraulic oil and retarder. Indicator Lamps for: Steering pumps, generator, direction indicator, main beam,service brake,parking brake, collective fault signalfor drive system, suspension locking, low pressure monitor for air filter, hazard warning lights, rear fog light. |
| Crane Electrical System: | 24V |
| Saftey Equipment: | Hoist limit switch, lower limit switch, pipe rupture saftey valves. |
| S.L.I.: | Electronic safe load indicator with automatic shutdown and digital displays for actual and permitted load, working radius and operating modes. |
3. Telescopic Boom
| Profile: | CT profile with slanted sheaf head made of high-tesile fine-grained steel comprisiong: Basic boom section and seven hydraulic telescopic sections. Max. boom length: (Extended) 132 Ft. - 10 In. Min. boom length:(Retracted) 23 Ft. - 4 In. The max. telescopic hoist load is limited by hydraulic pressure, hoist rope reving, boom angle and boom lubrication. |
| Telescopic System: | 2 telescopic cylinders (1 x 2-stage plunger cylinder and 1 x 5-stage plunger cylinder). Retracting by menas of traction with telescopic winch. |
| Boom Head: | 1 head sheave for hoist 1, option: 1 head sheave for hoist 2 6 deflection sheaves Max. lifting capacity: 80 Ton (with heavy load device) Lifting capacities above 55 Ton can be reached with heavy load device |
4. Counterweight
| Profile: | Several sections for wheel load trimming> Total weight: Approx. 6.6 Tons. Cylinder for automatic picking-up of counterweight on the superstructure. Automatic picking-up of the counterweight can be done from the cab. |
| Counterweight Versions: | Additional counterweight: 3.3 Tons |
5. Additional Equipment
5.1
Air conditioning system
5.2
Auxiliary heater (gas)
5.3
Tropicalized cooler execution
5.4
Special painting
5.5
Inscription according to customer's wishes
5.6
Spare Wheel: 16.00 R25 (with holding device)
5.7
Second winch for hoist 2
5.8
Trailer coupling (according to approval regulations)
5.9
Hook Block: 15 Tons
5.10
Hook Block: 35 Tons
5.11
Hook Block: 60 Tons
5.12
Swingaway Jib (manual)
5.13
Working Platform
5.14
Attachment Adapter
5.15
Winch Rotation Indicator
6. Crane Comparison
Description
CT.3
KMG 4085
Capacity
80 Tons
85 Tons
Main Boom
-Retracted
-Extended
23.3 Ft.
133 Ft.
38 Ft.
125 Ft.
Jib Optional
-Retracted
-Extended
-Offsetable
-Luffing
28.8 Ft.
42 Ft.
Variable 0-45o
Yes
33 Ft.
52 Ft.
0o-16o-30o
No
Max. Reach, Radius
-Main Boom
-Jib Retracted
-Jib Extended
118 Ft.
146.8 Ft.
160 Ft.
110 Ft.
140 Ft.
150 Ft.
Max. Hook Height
-Main Boom
-Jib Retracted
-Jib Extended
136 Ft.
164.8 Ft.
178 Ft.
128 Ft.
160 Ft.
180 Ft.
Elevation
-7o to 82o
-3o to 84o
Dimesions
-Length
-Width
-Height
29 Ft.
8 Ft.-2 In.
12 Ft.- 2 In.
44 Ft.- 2 In.
9 Ft.- 5 In.
12 Ft.- 5 In.
Tries
16.00 R25
14.00 R25/16.00 R25
Chassis
6x6x6
8x6x8
Oustide Turning Radius
19 Ft.- 8 In.
38 Ft.- 10 In.
GVW
80,000 Lbs.
106,000 Lbs.
Travel Speed
47 MPH
46 MPH
Gradeability
70%
60%
Slewing
2 RPM
2.4 RPM
Outrigger Span
-Full Width
-Half Width
-Retracted Width
24 Ft.- 1 In.
13 Ft.- O In.
7 Ft.- 6 In.
23 Ft.- 7 In.15 Ft.-8 In.
Engine
Man
Daimler Benz
Model
D2865LF
OM442
Electrical
24V
24V
Back to CT.3 main page.
E-mail us with any questions or comments!
| 5.1 | Air conditioning system |
| 5.2 | Auxiliary heater (gas) |
| 5.3 | Tropicalized cooler execution |
| 5.4 | Special painting |
| 5.5 | Inscription according to customer's wishes |
| 5.6 | Spare Wheel: 16.00 R25 (with holding device) |
| 5.7 | Second winch for hoist 2 |
| 5.8 | Trailer coupling (according to approval regulations) |
| 5.9 | Hook Block: 15 Tons |
| 5.10 | Hook Block: 35 Tons |
| 5.11 | Hook Block: 60 Tons |
| 5.12 | Swingaway Jib (manual) |
| 5.13 | Working Platform |
| 5.14 | Attachment Adapter |
| 5.15 | Winch Rotation Indicator |
6. Crane Comparison
Description
CT.3
KMG 4085
Capacity
80 Tons
85 Tons
Main Boom
-Retracted
-Extended
23.3 Ft.
133 Ft.
38 Ft.
125 Ft.
Jib Optional
-Retracted
-Extended
-Offsetable
-Luffing
28.8 Ft.
42 Ft.
Variable 0-45o
Yes
33 Ft.
52 Ft.
0o-16o-30o
No
Max. Reach, Radius
-Main Boom
-Jib Retracted
-Jib Extended
118 Ft.
146.8 Ft.
160 Ft.
110 Ft.
140 Ft.
150 Ft.
Max. Hook Height
-Main Boom
-Jib Retracted
-Jib Extended
136 Ft.
164.8 Ft.
178 Ft.
128 Ft.
160 Ft.
180 Ft.
Elevation
-7o to 82o
-3o to 84o
Dimesions
-Length
-Width
-Height
29 Ft.
8 Ft.-2 In.
12 Ft.- 2 In.
44 Ft.- 2 In.
9 Ft.- 5 In.
12 Ft.- 5 In.
Tries
16.00 R25
14.00 R25/16.00 R25
Chassis
6x6x6
8x6x8
Oustide Turning Radius
19 Ft.- 8 In.
38 Ft.- 10 In.
GVW
80,000 Lbs.
106,000 Lbs.
Travel Speed
47 MPH
46 MPH
Gradeability
70%
60%
Slewing
2 RPM
2.4 RPM
Outrigger Span
-Full Width
-Half Width
-Retracted Width
24 Ft.- 1 In.
13 Ft.- O In.
7 Ft.- 6 In.
23 Ft.- 7 In.15 Ft.-8 In.
Engine
Man
Daimler Benz
Model
D2865LF
OM442
Electrical
24V
24V
Back to CT.3 main page.
E-mail us with any questions or comments!
| Description | CT.3 | KMG 4085 |
|---|---|---|
| Capacity | 80 Tons | 85 Tons |
| Main Boom -Retracted -Extended |
23.3 Ft. 133 Ft. |
38 Ft. 125 Ft. |
| Jib Optional -Retracted -Extended -Offsetable -Luffing |
28.8 Ft. 42 Ft. Variable 0-45o Yes |
33 Ft. 52 Ft. 0o-16o-30o No |
| Max. Reach, Radius -Main Boom -Jib Retracted -Jib Extended |
118 Ft. 146.8 Ft. 160 Ft. |
110 Ft. 140 Ft. 150 Ft. |
| Max. Hook Height -Main Boom -Jib Retracted -Jib Extended |
136 Ft. 164.8 Ft. 178 Ft. |
128 Ft. 160 Ft. 180 Ft. |
| Elevation | -7o to 82o | -3o to 84o |
| Dimesions -Length -Width -Height |
29 Ft. 8 Ft.-2 In. 12 Ft.- 2 In. |
44 Ft.- 2 In. 9 Ft.- 5 In. 12 Ft.- 5 In. |
| Tries | 16.00 R25 | 14.00 R25/16.00 R25 |
| Chassis | 6x6x6 | 8x6x8 |
| Oustide Turning Radius | 19 Ft.- 8 In. | 38 Ft.- 10 In. |
| GVW | 80,000 Lbs. | 106,000 Lbs. |
| Travel Speed | 47 MPH | 46 MPH |
| Gradeability | 70% | 60% |
| Slewing | 2 RPM | 2.4 RPM |
| Outrigger Span -Full Width -Half Width -Retracted Width |
24 Ft.- 1 In. 13 Ft.- O In. 7 Ft.- 6 In. |
23 Ft.- 7 In. |
| Engine | Man | Daimler Benz |
| Model | D2865LF | OM442 |
| Electrical | 24V | 24V |
E-mail us with any questions or comments!